1. Prepare your equipment: You will need a Verbatim Gateway autodialer and 510VAB-1 cable, supplied by RACO, and a CompactLogix PLC, RS232 cable and RSLogix software, supplied by Allen-Bradley.
2. Set up CompactLogix communications: Launch the RSLogix software, then use the tabs to set up the serial and system protocol. Next, configure the CompactLogix base tags. Map the tags to the SLC platform using the proper form.
3. Set up Verbatim Gateway communications: Configure the autodialer to link its remote channels to the PLC via DF1. This will allow it to monitor status and alarm conditions.
For step-by-step instructions and diagrams, visit RACO’s Support Center.
